Bowflex Ultimate 2 - Manual (Page 6)

4
Using Your Bowflex Ultimate
®
2
Folding & Moving Your Bowflex Ultimate
®
2
Folding and moving your Bowflex
Ultimate ® 2 is easy. Follow the simple
steps below to fold your Bowflex
Ultimate ® 2. Once it’s folded,
simply roll it away.
1. Remove all attachments and
the bench from the machine.
2. Lock the sliding seat in the
forward locked position.
3. Lift the seat rail (toward the
Power Rod ® units) and lock it
in the upright position using
the rail securing device.
4. Fold the rail support
leg down.
5. Squeeze the platform
release handle and lift the
platform (toward the Power Rod ® units) until
it locks in the upright position.
Maintenance & Care of Your Bowflex Ultimate
®
2
Inspect your machine for any worn or loose
components prior to use. Tighten or replace
any worn or loose components prior to
use. Pay close attention to cables, or belts
and their connections.
Clean the bench with a non-abrasive household
cleanser after each use. This will keep it looking
new. Do not use automotive cleaner, which can
make the bench too “slick.”
Review all warning notices. The safety and
integrity designed into a machine can only be
maintained when the equipment is regularly
examined for damage and repaired. It is the
sole responsibility of the owner to ensure
that regular maintenance is performed. Worn
or damaged components shall be replaced
immediately or the equipment removed from
service until the repair is made. Only manufacturer
supplied components shall be used
to maintain/repair the equipment.
To fold or unfold the Bowflex Ultimate ® 2 simply
grasp the metal bar and plastic handle and squeeze
them together to retract the locking pins. When
folding the Front Base, release the plastic handle
when the base is vertical and make sure it locks
securely into place.
With use, the cables can stretch and the locking
pins may not engage. If you experience problems
with getting pins to lock into place when folding
or unfolding the machine, refer to your assembly
manual for instructions on how to adjust the the
cables.
If you have any questions regarding your Bowflex Ultimate ® 2, please call our Customer Service
Department at 1-800-605-3369 or by mail at: 16400 SE Nautilus Drive, Vancouver, WA 98683.
Unfolding Your Bowflex Ultimate
®
2