Minolta X-700 - Manual (Page 13)

To attach lenses
After removing the body cap and
rear lens cap, align the red mount-
ing index on the lens barrel w i t h
the red index on the camera's lens
mount, insert the lens bayonet into
the socket, then turn the lens clock-
wise until it locks into place with a
click.
To remove lenses
While pushing the lens-release
b u t t o n , turn the lens counterclock-
wise as far as it will go, then l i f t it
out of the mount.
C A U T I O N
• Be careful not to touch anything
inside the camera when attaching or
removing lenses.
Care of glass surfaces
• Never touch lens or eyepiece
surfaces with fingers or other ob-
jects. If necessary, remove loose
matter with a blower brush. Use
special photographic lens tissue or a
soft, clean cloth to remove smudges
or fingerprints with a gentle circular
motion. Only if absolutely neces-
sary, the tissue may be moistened
very slightly with not more than
one drop of a satisfactory quick-
evaporating fluid cleaner specially
compounded for photographic
lenses. Such fluids must never be
dropped directly on the glass sur-
face.
• Never lift the mirror or touch its
surface, as doing so might damage
the alignment. Small smudges or
fingerprints on the mirror will not
affect the meter reading or image
quality; if they are very annoying,
have the camera cleaned at an
authorized Minolta service facility.
11