Minolta X-700 - Manual (Page 19)

A handy ISO (DIN-ASA) table,
w i t h a surrounding memo holder
for keeping the film-box end as a
reminder of the f i l m type and
number of exposures, is located on
the camera back.
Loading film
Before opening the camera back,
confirm that there is no film inside
that could be damaged by light if
the back is opened, by checking
that:
• No red is visible in the Safe Load
Signal (see p. 20).
• Rewind crank can be freely
rotated clockwise many times
w i t h o u t pushing rewind button.
Since the frame counter advances
each time the shutter is cocked
even if no film is inside, the camera
may be empty even when the index
does not point to " S " .
Prior to loading f i l m , set the f i l m
speed (see previous page) and turn
the main switch on (p. 13).
CAUTIONS
• Film should be handled and load-
ed in subdued light - at least
shaded from direct sunlight by your
body.
• Do not touch any parts or areas
shown in blue below.
17
LOADING AND ADVANCING FILM