Minolta X-700 - Manual (Page 58)

MOTOR DRIVE 1 and AUTO WINDER G
With M o t o r Drive 1 attached, you can capture the action with single-frame
or continuous operation at either 2 or 3.5 frames per second. The comfortable
handgrip has t w o operating buttons, each w i t h a Minolta " t o u c h s w i t c h " ,
enabling full viewfinder readout for either horizontal or vertical framing.
Auto Winder G lets you focus full attention on the creative aspects of
photography by freeing you from winding the f i l m after each picture.
Continuous sequences up to 2fps are also possible by holding the camera's
operating button d o w n .
Both units are designed to attach quickly and easily without access caps to
remove or store. Their film-advance mechanisms stop automatically at the end
of the roll, and f i l m can be easily loaded and unloaded w i t h o u t removing the
units.
WIRELESS CONTROLLER IR-1 SET
The IR-1 infrared transmitter/receiver set lets you trigger the X-700 from
up to 60m (about 200 ft.) away for remote-controlled single-frame exposures,
continuous sequences, or time exposures. When used with extra receivers, the
three-channel transmitter enables independent operation of up to three
cameras or groups of cameras, or simultaneous operation of an unlimited
number of cameras.
56