Minolta X-700 - Manual (Page 15)

Main switch
For the camera's circuitry and
shutter to operate, the main switch
must be set at either " O N " or
" O N ". The latter position should be
used when you want audible beeps
during self-timer operation or an
audible warning whenever the shut-
ter speed set or recommended by
the camera is 1/30 sec. or slower.
(For the slow-shutter-speed warning
to function, the operating button
must be touched or slightly
pressed.)
To prevent accidental exposures
and battery drain, move the main
switch to " O F F " when you are
done taking pictures. (When the
switch is left on, however, battery
drain occurs only if the operating
button is touched, so you may
want to leave it on to avoid missing
unexpected shots.)
13