Concord Camera 3132z - Manual (Page 17)

Preparing to Take Pictures
12
Note: The default setting is “ 1 minute”.
1 minute: This camera will automatically turn off if there is no activity after
one minute. Press the Power button to turn on the camera again.
3 minutes: This camera will automatically turn off if there is no activity after
three minutes. Press the Power button to turn on the
camera again.
5 minutes: This camera will automatically turn off if there is no activity
after five minutes. Press the Power button to turn on the
camera again.
Off: This camera will not perform the power saving function. This setting is not
TV Out Signal Set-Up
This camera can connect directly to a TV set. Please refer to Page 48 of
“Viewing images on a TV set.” It allows you to use the TV screen as your cam-
era LCD screen when shooting or replaying images.
The Video output signal can be switched between NTSC or PAL to accom-
modate different signal systems. The default setting will vary between regions.
NTSC: U.S.A., Canada, Taiwan, Japan, etc.
PAL:
Europe, Asia (excluding Taiwan), etc.
1. Turn the mode dial to SET ( ).
2. Press the DOWN button ( ) until the VIDEO SYSTEM icon
( ) is highlighted.
recommended as batteries are consumed more quickly in this setting.