Concord Camera 3132z - Manual (Page 65)

60
Reference
- Install the USB driver before
you connect the camera to a
connecting to a computer with
Cannot transfer images after
USB cable.
PC.
- Turn the camera on.
- USB driver is not installed.
- Camera is turned off.
If the low-battery indicator
appears on the camera LCD
screen, replace batteries with a
subjects, use the camera to
Normal/Infinity focus mode.
- Hold the camera steady when
- Be sure that there is at least
80cm between the camera
- Use the macro mode to shoot
close-up images at a
- When shooting distant
- Turn your mode dial to Auto
mode or Manual mode.
- Wait until the flash is
- Delete images you no longer
This camera can not display
Set the flash to any other mode
appropriate setting, NTSC or
- Please use the attached video
cable to connect the camera
- Set the video system to the
Recorded images are not
Images are not displayed.
The flash doesn't fire.
Images do not show on the TV.
saved in memory.
full set of new ones.
non-DCF images.
except Off.
to the TV correctly.
PAL for your TV.
completed.
the save operation has
The camera powers off before
A memory card with non-DCF
images recorded with another
camera are loaded in the
camera.
The flash mode is set to Off.
- There is a problem with the
camera-TV connection.
- Incorrect video system
setting.
Images are blurry or out of focus.
Images are not recorded when
the shutter release button is
pressed.
shooting.
lens and the subject.
distance of 20cm.
- The camera moved
focus range
- The subject was out of
charged.
need.
- Memory is full.
- Flash is charging.
Playback mode.
- The mode dial is set to
Problem Cause Action
- The card may be defective.
- Format the card correctly.
- Delete images you no longer
- Insert a new SD card.
- Wait until the flash charges.
mode, Manual mode or Video
- Turn the mode dial to Auto
The camera does not take
need.
mode.
correctly.
- The SD card is not formatted
- Memory is full.
- The flash is charging.
Playback mode.
- The model dial is set to
pictures