Concord Camera 3132z - Manual (Page 34)

29
Taking Pictures
Auto Manual Mode Video
: Available
: Not Available
X
Macro
NOTE:
· The distances mentioned above represent the distances from the
camera’s lens surface to the subject.
· The flash is set to “Flash Off” each time the Macro feature is
activated.
· Users can change the flash setting to “Flash Fill” by pressing the Flash button.
The Auto Flash and Red-Eye Reduction setting cannot be set in
Macro Mode.
Setting the Self-Timer
You can adjust the self-timer delay to either 2 seconds or 10 seconds.
1. Set the Mode dial to Auto ( ) or Manual ( ).
2. Continually press the Self-Timer button ( ) until the desired
Self-Timer Options:
OFF - Turns the Self-Timer off.
-2 SEC.(Press Self-Timer one time)
indicates a countdown of two seconds.
- 10 SEC.
Indicates a countdown of ten seconds.
3. Be sure that the (2 sec.) or (10 sec.) icon appears
on the LCD monitor, then press the Shutter button.
time setting appears in the LCD.
(Press Self-Timer twice)