CBM America CBM-262 - Manual (Page 95)

7
Chapter 7 Print Control Codes
86
(51) Printing a downloaded bit image (GS / m)
Code: [1D] h + [2F] h + m
* (0
m 3, 30 m 33) Data are expressed in Hex code.
This command prints a downloaded bit image in the mode specified by m.
•
The modes selected by m are as shown in the following table.
m Mode Name Vertical Dot Density Horizontal Dot Density
0,30 Normal Mode 203 DPI 203 DPI
1,31
Horizontal
203 DPI 101 DPI
Double Mode
2,32
Vertical Double
101 DPI 203 DPI
Mode
3,33 Quadruple Mode 101 DPI 101 DPI
• If data exist in the print buffer, this command is disregarded.
• If a downloaded bit image is not defined, this command is disregarded.
• The portion of a downloaded bit image that exceeds the length of a line is not
printed.