Aiwa AV-D35 - Manual (Page 14)

RECEPTION
MANUAL TUNING
MONO
TUNER
To change the AM tuning interval
The default setting of the AM tuning interval is 10 kHz/step. if
you use this unit in an area where the frequency aiiocation
system is 9 kHz/step, change the tuning intervai.
Hoid down the VÌDEO 1/5.1CH/BAND button and press the
POWER button.
To reset the intervai, repeat this procedure.
Turn the FUNCTION selector to select theTUNER
function, and press the VIDEO 1/5.1 CH/BAND
button repeatedly to select the desired band.
FM •AM □
The display changes to frequency indications after indicating
band and video source (V1, V2 or V3) for two seconds.
Press the UP or DOWN button to select a station.
Each time the button is pressed, the frequency changes.
When a station is received, “TUNE” is displayed for two
seconds. During FM stereo reception, (li®il) is displayed.
( t'-l J ' AHi'NA. _
To search for a station quickly (Auto Search)
Keep the UP or DOWN button pressed until the tuner starts
searching for a station. After tuning in to a station, the search
stops.
To stop the Auto Search manually, press the UP or DOWN button.
• The Auto Search may not stop at stations with very weak
signals.
When an FM stereo broadcast contains noise
Press the MONO TUNER button on the remote control so that
“MONO” appears on the display.
Noise is reduced, although reception is monaural.
MONO
I n : .'i.nr I I icnr^'L______
LLM-iJ r^T!) ljì 'J m :
To restore stereo reception, press the button so that “STEREO”
appears.
1 3
ENGLISH