AEG 318V User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
For the
electrical
installer
2. Pass cable through the grorrmnet in the lower back panel and
the cable clamp.
3. Connect the wires to the terminals in accordance with the dia
gram. Ensure that links are correctly positioned between ter
minals (5 or 6 way terminal block). The length of the earth con
ductor must be adequate to ensure that in case of the cable
clamp breaking the earth wire is subject to mechanic strain
only after the live wires.
4. Tighten the cable clamp screw.
51 Close the cover of the terminal box,
6. When pushing the cooker into its permanent position' make
sure that the mains cable is neither kinked nor trapped under
the appliance.
After installation there must be no acess to live parts