Alvin CraftMaster CM40-4-WB User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I i ’ ' '
1
I I I I I ■ M ■ I ' I ' I ' I ' '
0
r
rrjT^
1"
19. Snap together the two drawer frame sets "J". This is best done with
the drawers removed. Note that sets consist of distinctive top, middle
and bottom pieces. (Middle piece has open top and open bottom.
Bottom piece has open top and solid bottom with 4 round feet. Top
piece has solid smooth top and open bottom.) TIP: When snapping
together, start simultaneously in the two front corners and slowly
work your way to the back corners making sure that each tab is
aligned before applying pressure. When complete, slightly loosen the
alien bolts holding the drawer support hangers "H" and slide each of
the drawer units into place. Retighten all drawer support bolts
22. Table assembly is now complete and ready to use. Please save these
instructions for future reference. Enjoy!
Page 9