Bulldog Security DELUXE 500 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
IMPOSTATfT NOTICE
■XX» RCMOTE COMTSOL TRAMSCEEVCS
WARNINGS:
As with any product that performs automatic functions, there are certain
safety precautions that you must
practice and be aware of.
1. Keep aii transmitters out of the reach of chiidren
2. Do not ieave anyone In the vehicie while running in remote controi mode.
3. Notify servicing personnei that the vehicle can oe remote started.
4. Do not start the vehicle by remote while the vehicle is in an enciosed
area or garage.
5. Always apply the parking brake and lock the vehicle before exiting.
6. The use and operations of this system is the soie responsibiiity of the
operator.
7. Some areas may have local ordinances that prohibit leaving a vehicle
running on public streets.
3. Count Down Timer Setting: Example Set count down timer at 2:30
1. Press and hold the
F button
for 3 seconds, with two-melody sound
and the
"Hours"
digit flashes for adjusting.
2. Press the
F button
5 times, the LCD screen will shows icon and
"Hours"
digit is flashes for adjusting.
3. Press the
t
or$
button
to decrease or increase the
"Hour"
digit until
2:xx.
4. Press the F button
once again then the
"Minutes"
digit flashes
for adjusting.
5. Press the or ^ button to decrease or increase the
"Minute"
digit
until
2:30.
6. Press the
F button
once again then £> icon flashes for alert alarm
"ON
/
OFF"
setting
7. Press the ^
button
to start the count down timer, and the
"ON"
icon
will show on the LCD screen. Press the
button
to stop the count
down timer, and the
"OFF"
icon will show on the LCD screen.
8. Press the
F button
for 2 seconds with one-melody sound to confirm
exit the timer program mode.
Note:
Maximum is 19 hours.
4. Time Set-Up For "Daily Timer Start": Example to AM 6:30
1.
Press and hold the
F button
for 3 seconds, with two-melody sound
and the
"Hours"
digit flashes for adjusting.
2.
Press and hold the
3 button
for 2 seconds, the LCD screen will flash
0/Ci icon and "Hours" digit for Hour set-up.
3. Press the r|c or ^
button
to decrease or increase the hour digit until
AM 6:00.
4. Press the F button
once again then the minute digit flashes.
5. Press the or ^ button to decrease or increase the minutes digit until
AM 6:30.
6. Press the
F button
for 2 seconds with one-melody sound to confirm
exit the timer program mode.
25