Aiwa NSX-A888 - Manual (Page 19)

RANDOM /REPEAT PLAY
Use the remote control.
RANDOM play
All the tracks on the selected disc or all the discs can be played
randomly.
REPEAT play
A single disc or all the discs can be played repeatedly.
Press RANDOM/REPEAT while pressing SHIFT .
Each time it is pressed, the function can be selected cyclically.
RANDOM play — RANDOM lights up on the display.
REPEAT play — lights up on the display.
RANDOM/REPEAT play — RANDOM and light up on the
display.
Cancel — RANDOM and Ci- disappear from the display.
To play all discs, press ◄►to start play.
To play a single disc, press one of DISC DIRECT PLAY 1-3 to
start play.
r til
During random play it is not possible to skip to the previously
played track with
a
z
>
<
Up to 30 tracks can be programmed from any of the inserted q
discs. y
Hawn r
J
-2
3
5
,/f I
Use the remote control.
1 Press PRGM twice while pressing SHIFT in stop
mode.
“PRGM" is displayed .
PRGM
......
BLANK SKIP PLAY
The silent portions between tracks recorded on a CD can be
skipped during playback.
1 Press CD BLANK SKIP.
“CD BLANK SKIP ON” is displayed and a small dot appears
in the display.
Small dot
■ =CD
2 Press ◄►to start playback.
The silent portions between tracks will be skipped, and the
sound will be played back without interruption. If a track fades
out (ends with the sound gradually decreasing), the fadeout
portion also will be skipped.
To return to normal playback
Press CD BLANK SKIP again, and “CD BLANK SKIP OFF” is
displayed and the dot in the display disappears.
•There may be a case where BLANK SKIP PLAY does not
function correctly.
• BLANK SKIP PLAY is automatically canceled when performing
Al EDIT RECORDING (page 22), PROGRAMMED EDIT
RECORDING (page 23), or recording during PROGRAMMED
PLAY (page 19) or RANDOM PLAY (page 19).
• When PRGM is pressed once in step 1, the unit enters the
KARAOKE PROGRAM (page 25).
Press DISC DIRECT PLAY 1-3 to select a disc.
Go to the next step when the tray stops rotating.
Press numbered buttons 0-9 and +10 to program
a track.
Example:
To select the 25th track, press +10. +10 and 5.
To select the 10th track, press +10 and 0.
Total number of
Selected track number selected tracks
W\r F".........01
Program number
o
.fP
Total playing time of
the selected tracks
4 Repeat steps 2 and 3 to program other tracks.
5 Press ◄►to start play.
To check the program
Each time ◄◄ or ►► is pressed in stop mode, a disc number,
track number, and program number will be displayed.
To clear the program
Press ■ CLEAR in stop mode.
To add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be programmed
after the last track.
To change the programmed tracks
Clear the program and repeat all the steps again.
To play the programmed tracks repeatedly
After programming the tracks, press RANDOM/REPEAT
repeatedly while pressing SHIFT until ci. appears on the display.
' During programmed play, you cannot perform random play,
check fhe remaining time, and select a disc or track. “Can’t
USE” is displayed if you attempt to select a track.
' “FULL” is displayed if you attempt to program more than 30
tracks. H n
ENGLISH \ y