Check your system and accessories, Before connecting the ac cord, Important – Aiwa NSX-A888 User Manual
Page 4: F connect the right speaker to the main unit, 2 connect the left speaker to the main unit, Fm antenna, Am antenna, Preparations
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PREPARATIONS
mmm
Check your system and accessories
NSX-A888
CX-NA888 Compact disc stereo cassette receiver
SX-WNA888 Front speakers
Remote control
AM antenna
FM antenna
Operating Instructions, etc
Before connecting the AC cord
The rated voltage of your unit shown on the rear panel is
120 V AC. Check that the rated voltage matches your local
voltage.
IMPORTANT
Connect the speakers, antennas, and ail optional equipment first.
Then connect the AC cord.
There are no differences between the front speakers. Both
speakers can be connected as L (left) or R (right).
f Connect the right speaker to the main unit.
® Connect the speaker cord with the plug to the
SPEAKERS
HIGH FREQ R
terminal.
@ Connect the speaker cord with the white stripe to the
SPEAKERS LOW FREQ R O
terminal and the black cord
to the O terminal.
2 Connect the left speaker to the main unit.
Connect the speaker cord with plug to the
SPEAKERS HIGH
FREQ L
terminal, and another speaker cord to the
SPEAKERS LOW FREQ L
terminals in the same manner as
step 1.
FM antenna
AM antenna
4
ENGLISH