Aiwa NSX-A888 - Manual (Page 30)

Speaker system SX-WNA888
Cabinet type
Speakers
Main unit CX-NA888
FM tuner section
Tuning range
Usable sensivity (IHF)
Antenna terminais
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Mid-high frequency ampiifier
Power output
Total harmonic distortion
Low frequency amplifier
Power output
Totai harmonic distortion
Inputs
Outputs
Cassette deck section
Track format
Frequency response
Recording system
Heads
87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
350 pV/m
Loop antenna
20 W + 20 W (200 Hz - 20 kHz,
THD less than 1%, 6 ohms)
0.1 % (low, 1 kHz, 6 ohms, DIN
AUDIO)
80 W + 80 W (50Hz - 200 Hz, THD
less than 1%, 6 ohms)
0.1 %(45W, 130 Hz, 6 ohms, DIN
AUDIO)
VIDEO/AUX: 316 mV (adjustable)
MD: 316 mV (adjustable)
MIC 1, MIC 2: 1 mV (10 k ohms)
SPEAKERS HIGH FREQ:
accept speakers of 6 ohms or more
SPEAKERS LOW FREQ:
accept speakers of 6 ohms or more
SURROUND SPEAKERS:
accept speakers of 8 ohms to 16
ohms
LINE OUT: 150 mV
PHONES (stereo jack): accepts
headphones of 32 ohms or more
4 tracks, 2 channels stereo
Cr02 tape: 50 Hz - 16000 Hz
Normal tape: 50 Hz - 15000 Hz
AC bias
Deck 1: Playback head x 1
Deck 2:Recording/playback head
X 1, erase head x 1
Compact disc player section
Laser
D-A converter
Signal-to-noise ratio
Harmonic distortion
Wow and flutter
General
Power requirements
Power consumption
Dimensions of main unit
(W
X
H
X
D)
Weight of main unit
Standby power consumption
Semiconductor laser ( X = 780 nm)
1 bit dual
85 dB (t kHz, 0 dB)
0.05 % (1 kHz, 0 dB)
Unmeasurable
120 V AC, 60 Hz
150 W
260
X
324
X
346 mm
(10V4X 1278X 13Vein.)
7.8 kg (17 lbs 3 oz.)
With power-economizino mode off:
29 W
With power-economizing mode on:
1.5 W
Impedance
Output sound pressure level
Dimensions (W x H x D)
Weight
3 way, subwoofer (magnetic
shielded type)
Subwoofer:
160 mm (6 Vain.) cone type
Full range:
120 mm (4 % in.) cone type
Super tweeter:
20 mm ('Viein.) ceramic type
6 ohms/6 ohms
87 dB/W/m
240
X
345x 300 mm
(9 72X 13 Vex 11 Vein.)
6.0 kg (13 lbs 4 oz.)
Specifications and external appearance are subject to change without
notice.
uuu SYSTEM
The word “BBE” and the “BBE symbol” are trademarks of BBE
Sound, Inc.
Under license from BBE Sound, Inc.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the c ountry in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user’s
right or authority to operate this product.
30
ENGLISH