Basic operations, Basic recording, Usable tapes – Aiwa NSX-V2100 User Manual

Page 10: 1 press the tape button, Push the cassette hoider to close it, 3 press the ^ button to start piayback, To stop playback, To pause, To fast forward or rewind, Preparation

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TAPE PLAYBACK

RECORDING

BASIC OPERATIONS

BASIC RECORDING

Usable tapes

Use only normal (type I) tapes.

1 Press the TAPE button.

2 Press the ■/£ button to open the cassette holder

and insert a tape exposed side down.

Push the cassette hoider to close it.

3 Press the ^ button to start piayback.

Only the side facing you can be played back.

To stop playback

Press the M / ± button.

To pause

Press the II button.

To resume play, press it again.

To fast forward or rewind

In the stop mode, press the ◄◄ or ►► button, and then press

the M / ± button to stop winding.

When both deck 1 and deck 2 are set in the piayback

mode
Deck 2 is heard.

Preparation

• Wind up the tape to the point recording starts.
• Note that recording is done on only one side of the tape.
• Use only normal (type I) tapes.

1 Insert the tape to be recorded on into deck 1 and

push the cassette holder to close it.

2 Get ready for the source to be recorded.

To record from a CD

Press the CD button and load a disc.

To record from a tape

Press the TAPE button. Then, insert the original tape into

deck 2 and play it.

To record from a radio broadcast

Press the TUNER/BAND button and tune in to a station.

To record from the connected source

Press the VIDEO/AUX button and play it.

3 Press the # button to start recording.

The ► button is depressed simultaneously.
When recording from a CD. playing and recording start

simultaneously from the first track.

To stop recording

Press the M / ± button on deck 1.

To pause recording

Press the II button on deck 1.

To resume recording, press it again.

To record selected tracks of the CD

Before pressing the • button, program the tracks (see page 8).

To start recording preciseiy (except when recording from

a CD)

Before pressing the # button at step 3, press the II button on

deck 1. Then, press the

9

button. The deck enters recording

pause mode. When you wish to start recording, press the II
button again.

To record part of the CD
When the

9

button is pressed, recording always starts from the

first track. To start in the middle of a track, play the CD first and

press the II button for CD at the point you wish to start recording

from. Then, press the

9

button. The pause mode for CD button

is released automatically and recording starts.

Do not press the buttons on deck 2 during recording.

9

ENGLISH

Advertising