Blodgett S1820G - Manual (Page 35)

IL MAINTENANCE-MONTHLY
NOTE: The oven interior may require cleaning more
than once a month depending on the volume of
baking. To clean the interior, you have todlsassemble
some parts of the oven.
When cleaning your Series S1820G Oven note the
following:
PRECAUTIONS-
1. Do not use excessive water or saturation of oven
insulation will occur.
2. Do not use a caustic oven cleaner or the aluminized
finger manifold surfaces will be severely damaged.
When cleaning your oven, first remove all heavy debris
with a vacuum cleaner. Use a damp cloth for light cleaning.
For heavier cleaning of baked on grease and carbon
deposits use a non-caustic cleaner that will not react with
the aluminized finger manifold surfaces.
You can order non-caustic cleaner from your local autho­
rized Blodgett Parts Distributor in the quantities listed
below;
Part# Quantity
27170-0244 Case of Quarts (6)
27170-0246 Case of Gallons (4)
A. Removing Conveyor From Oven For Cleaning
1. Remove entry and exit trays.
2. Loosen (do not remove) two screws on housing guard.
3. Remove motor housing guard.
4. Lift conveyor and remove chain.
5. Lift other side of conveyor and push toward other side.
SECTiON 4
MAINTENANCE
Removable Air Fingers
(irwide baking chamber)
Console
Controls
Temperaturer
Contrdler
Blower and Cooling
Fan Motor
Conveyor
Speed
Control
Conveyor
Motor --
(Inside)
Motor
Housing
Guard
RemovaWe
Cnjmb Pan
Removable
Conveyor
Assembly
Legs
Adjustable
Eyebrow
Figure 4-3.
29