Concord Camera 4340z - Manual (Page 15)

-12-
By default the Date Stamp is set at OFF mode. If you want to have Date and Time shown
on the pictures, set the Date Stamp to ON mode.
1. Press the button.
2. Press the or arrow to select Date
Stamp then press the SET button or the
arrow to enter its submenu.
3. Press the or to set Date Stamp
on/off.
4. Press the SET button to confirm the
selection.
5. Press the button twice to close the menu window.
1. Press the button.
2. Press the arrow to select the Setup
Menu.
3. Press the or arrow to select
Language then press the SET button or
the arrow to enter its submenu.
4. Press the or to select a Language.
5. Press the SET button to confirm the
setting and to close the menu window.
Date Stamp
Setting the Language