Concord Camera 4340z - Manual (Page 50)

-47-
Note for Windows 98 users: You must install the camera driver supplied in the
CD-ROM before connecting the camera to the computer.
Connecting the Camera to a Computer with a USB Cable
Connect the supplied USB interface cable to the computer’s USB port and the camera’s
DIGITAL terminal.
The LCD monitor turns off when the connection to the computer has been successfully
completed.
1. The camera will turn off automatically if the USB cable is disconnected.
2. Use an optional AC power adapter when connected to a computer to save
battery power.
3. Windows 98 user: If this is the first time the camera has been connected
to the computer, Windows detects the camera as an “Unknown device”
and automatically completes the required software installation.
1. You do not need to turn off the computer or camera when making this
connection.
2. Please refer to your computer manual for information regarding the
location of the USB port.