Concord Camera 4340z - Manual (Page 31)

-28-
Erasing files by using the Review Menu
1. Press Camera Mode button to enter the
Playback Mode ( ).
2. Press the button.
3. Press the arrow to highlight Delete
ALL and then press the SET button or the
arrow to enter its submenu.
4. Press or to select Single or All,
then press the SET button or the arrow
to enter its submenu.
5. Press or to select Yes or No, then press the SET button to confirm.
6. Press Camera Mode button to exit the Playback Mode.
You can protect important images from being accidentally erased.
1. Press Camera Mode button to enter the
Playback Mode ( ).
2. Press the button.
3. Press the arrow to select Protect then press
the SET button or the arrow to enter its
submenu.
4. Press and to select Single or Protect All, then press or the SET button to
enter its submenu.
5. Press and to select Yes or No and then press the SET button to confirm the
choice.
Note: After pressing the SET button to protect one image, the protect icon will be shown
on the right top corner of the LCD. Press the button to close the menu window. If
you pressed the SET button again before exiting, the file will be unprotected.
To unprotect all the files, follow steps above but select “Unprotect All “ when protect Menu
is shown on the LCD.
Protecting Photos and Video Clips