Concord Camera 4340z - Manual (Page 44)

-41-
Step 7 The next screen will begin the DirectX setup.
Select “ I accept the agreement “ then click [Next >].
(fig . 2.3)
Step 8 Click [Next >]. (fig . 2.4)
Step 9 Click [Finish]. Your computer will automatically restart. (fig . 2.5)
Step 1 Make sure your camera is powered off and not connected to the computer.
Step 2 Make sure the computer is powered on and Windows is running.
Step 3 Close any other applications or software you may be running.
Step 4 Insert the supplied CD-ROM into your computer’s CD-ROM Drive.
NOTE: If the installer does not start automatically within 30 seconds after the
CD-ROM has been inserted, click on “My Computer” either on the Desktop or in
the Start Menu and locate the CD-ROM Drive. Double click on the CD-ROM Drive
icon for installation and proceed to Step 5.
Step 5 Select the language. Click [OK]. (fig . 3.1)
Step 6 The installation screen will appear, Click on Install ArcSoft PhotoImpression
2000. (fig
. 3.2)
INSTALLING ARCSOFT PHOTOIMPRESSION – ALL
WINDOWS USERS
Fig . 2.3 Fig . 2.4
Fig . 2.5