A&D Journal Printer AD-8118A - Manual (Page 22)

others
Printing buffer
This unit has a printing buffer of 80 lines. If data can not be printed the
data is stacked in this buffer and cleared as the printing progresses. If
this buffer exceeds 75 lines the "Busy Output" from the I/O is turned ON.
"B ERROR" is printed^ once when the buffer exceeds 80 lines. The
printing speed is 1.7 iines/sec, do not input the data faster than this
speed.
Error printing
This unit recognizes the foilowing errors and prints them;
Error printing Description
T ERROR A time out in manual printing.
U ERROR M Appears when the unit is different than the fast data unit in
cumulative total mode
S ERROR *2 Appears when the cumulative total weight is too much.
O ERROR Appears when an input is too much.
F ERROR Appears when the data format does not match.
I ERROR Appears when needless data (-, unstable data) is input
B ERROR Appears when the printing buffer is activated.
R ERROR*3 Appears when numbers other than "00" to "99" areinput as a
code input
*1 This message prints the weight value and accepts to the cumulative
total.
*Z This message prints the weight value but does not add the data to
the cumulative total.
*3 This message prints the weight value and accepts to the cumulative
total as code No, 00,
Proceduer of power on
Frist plesase power on other insturments coneciing to this printer and
power on this printer, if you power on other insturments with this printer at
same time and use automatic print mode or dumb print mode, frist data
can not often caludates. In manual print mode, No problem after
inputting several data to this printer.
owners-AD-8118A-v.3.a Page 31