These are the features of your appliance, Location, Assembly – AEG FINESSE KM 31 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
________________________ _
These are the features of your
appliance;
KM 21
FINESSE PLUS
•
Mixer
•
Plastic and metal knives
•
Whisk attachment
•
1 grating disc tor fine and coarse grating
•
1 slicing disc for thin or thick slicing
•
1 potato disc for finely grated potato
•
1 spatula
•
1 cookery book
•
simple filling opening
•
disc holder
KM 31
FINESSE SUPER
•
Same features as KM 21, plus:
•
Double filling opening
•
Orange/iemon squeezer
\
(optional extra
•
Mini-chopper
/ on KM 21)
KM 41
FINESSE PROFI
•
Same features as KM 31, plus
•
Pilot light
•
Potato-chipper disc (optional extra on KM 21
and KM 31)
•
Professional puree system (not suitable for
KM 21 or KM 31)
Location
The appliance should be set up on a level, dry
worktop with plenty of “elbow room”
Assembly
The working bowl and all accessories should
be clean and perfectly dry before work starts
Rg 3:
Set the working bowl up in such a way that the
drive shaft is inside ttie tube Lock it in by turn
ing it anti-clockwise
(until you hear it click into
place)
Rg 4:
Fit the accessories onto the drive shaft needed
for each kind of work
Rg 5;
Set the lid onto the working bowl with the lock
ing lugs at the rear The markings on the lid
must be exactly In line with those on the work
ing bowl Now turn the lid anti-clockwise
until
you hear it click into place
in the housing slit
Rg 1/A:
Make sure that the cover of the mixer drive is
locked in position
(you can hear it click into
place)
Rg 6:
Only ever use the pestle to close the filler open
ing and to press the food down into the slicer
Before taking the tools to pieces, always press
the “0" button (fig 2/C) and pull the plug out
Fitting the mixer
(accessory on KM 21 KM 31,
and KM 41) and the
mini-chopper
(accessory
on KM 31 and KM 41, optional extra on KM 21)
Before fitting the mixer or the mini-chopper,
release the cover of the working bowl and
remove it
Rg 7:
Remove the cover from the mixer drive
Fig. 8/A
япй
8/B:
Set the mixer or the mini-chopper on the drive
and lock it into position
(you can hear it cli^
into place)
19