Cable storage chamber and grips, How to start using your appliance – AEG FINESSE KM 31 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Cable storage chamber and grips

Fig 1/G:

Your food processor has a cable chamber in its

base If the lead is longer than is needed to

reach the socket, the surplus can be stored
here Then press the cable into the openings

(in the rear of the base) that grip it

How to start using your appliance

Fig 2:

There are two buttons and one selector knob

on the control panel

Rg 2/A:

When you press the impulse button the appli­

ance will start, and it will stop again as soon as

you let go

Fig 2/B:

The “1" button will start the appliance and keep

it running

Fig 2/C:

The “0” button switches the appliance off again

Fig 2Л5:

You can use the speed knob to set the right

working speed for the food you are working on

Slowest speed 1 (= O)

Highest speed Max

You can reach the maximum speed either by

turning the knob to the left or by turning it as far

as it will go to the right

Working with the double filler opening

on the KM 31 or KM 41;

Large opening (A)

Slicing potatoes, gherkins, etc, grating pota­
toes, cabbage, carrots, etc {cut them up first

into pieces about 6 or 7 cm -

2

V

2

inches -

across)

Small opening: (6)

Slicing carrots, radishes, small gherkins, etc

into tine slices

When pressing the food down,

only

ever use

the pestle (fig 1/H)

20

Advertising
This manual is related to the following products: