Arcam CR80 - Manual (Page 2)

TABLE OF CONTENTS
INTRODUCTION
INSTALLING THE BATTERIES
FEATURES AND FUNCTIONS
Basic Operation
Picture of the ARCAM CR80
Controlling AV components, General Use
Controlling Arcam AV Components
PROGRAMMING OTHER COMPONENTS
SEARCHING FOR YOUR CODE
learning a FUNCTION
RE-ASSIGNING DEVICE KEYS
CHANGING VOLUME LOCK
TROUBLE SHOOTING
MANUFACTURER'S CODES
Setup Codes for TV
Setup Codes for VCRs
Setup Codes for Cable Converters
Setup Codes for Satellite or DBS Receivers
Setup Codes for CD Players
Setup Codes for DVD Players
Setup Codes for LO Players
Setup Codes for Cassette Decks
Setup Codes for Stereo Tuners or Receivers
Setup Codes for AV Processors
Setup Codes for Home Automation
Setup Codes for DBS Audio Services
Setup Codes for Video Accessories
2
3
3
4
5
6
7
8
9
10
11
12
24
25
26
26
26
26
27
27
27
27
27
27
27
INTRODUCTION
The ARCAM CR80 is the complete solution for all of your remote control
requirements. It is designed to operate up to eight devices with the
emphasis on features and functions of Arcam components.
The ARCAM CR80 is also customizable to allow for key configurations that
meet your specific needs. It*s also packed with the following features:
• Preprogrammed technology for easy setup
• Designed for use with up to eight devices
• Inclusive audio library
• Upgradability
• Backlighting
• Learning capability
This manual provides a basic overview on how to set up and operate the
ARCAM CR80. Please read the following instructions to see how easy
setup is.
• The CR80 remote control is custom manufactured for Arcam by Universal
Electronics, Inc.
INSTALLING BATTERIES
1 On the back of the ARCAM CR80. push the tab and lift off the
battery cover.
2 Obtain two (2) fully-charged AA alkaline batteries. Match
the + and - marks on the batteries to the + and - marks in the
battery case, then insert the new batteries.
3 Press the battery cover back into place. The tab should click when
the cover is locked.
4 Test the unit by pressing PWR and any device key (e.g., AUX, CBL,
VCR, etc.). If the batteries are inserted correctly, the LED will blink
once upon each keypress.
NOTE: When batteries need replacement, the ARCAM CR80 will blink twice
with every keypress. Simply replace them and the remote control will be
restored to its full functionality, including favorite settings.
FEATURES AND FUNCTIONS
Basic Operation
The Arcam CR80 is pre-programmed to operate Arcam amplifiers, DVD
players, CD players and AM/FM tuners. For full operating details, please
read the rest of the manual.
To control an AV component, first press the relevant key in the SELECT
DEVICE area of the remote.
In addition, this remote control contains a library of remote codes for other
manufacturers of AV system components, listed in the back of this manual.
The CR80 also has the capability of learning remote functions that are not
available in the code library. In order to make best use of the limited me­
mory available for learning, we strongly recommend that you use the
library codes where possible for your non-Arcam components, and then
learn new codes for non-library components.