Operation with tape one-touch recording (otr), Notes – Aiwa HV-DH1EH User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Operation with tape

One-Touch Recording (OTR)

Your VCR allows you to make recordings using a

variety of simple methods:

One-Touch Recording (OTR) start recording

immediately for a set period of time or until the

video cassette runs out.

Your VCR incorporates Long Play (LP) which

enables you to record up to twice the amount of

time on a video cassette. For example an E-180 will

record up to 180 minutes using Standard Play (SP);

using LP you will be able to record up to 360 minutes.

Please note there will be a slight loss in picture and

sound quality when using LP

1

2

3

4

Make sure that you have correctly connected your

VCR as described earlier in this book.

Press

POWER

to turn on your VCR.

Insert a video cassette with protection tab into your

VCR.
The video cassette should have the window side

facing up and the arrow facing away from you.

Press ▲ or T to select the

programme number

you wish to record.

You may also directly select programme number

using the

numbered buttons

on the remote control.

If you wish to record directly from the SCART or
RCA sockets repeatedly press

AV

until the socket

you wish to record from is displayed.

AV 1

for recording from EURO AV1 SCART socket

on the rear of your unit.

AV 2

for recording from EURO AV2 SCART socket

on the rear of your unit.

AV 3

for recording from AV 3 IN VIDEO and AUDIO

(Left & Right) sockets on the front of your unit.

5
6

7

8

Press

SPEED

if you wish to record in Long Play or

Standard Play.
SP will produce improved picture and sound quality,
however LP will provide twice as much recording

time as SP.

Press

REC/OTR

to start recording.

RECORD will appear on the TV screen.
Press

REC/OTR

several times. Each successive

press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.

Press

PAUSE/STEP

to avoid recording unwanted

scenes.

Press

PAUSE/STEP

to continue recording.

Tapes can be paused for up to 5 minutes; RECP
will be displayed when a tape is paused. After 5

minutes your VCR will stop recording to prevent
damaging the tape or your VCR.

Press

STOP

to end recording.

Press

EJECT

.

EJECT will appear on the TV screen for a few

seconds.

O
■D

m

J3
>

Notes

• If you do not wish to record on a tape (this can happen

quite easily by accident!) remove the protection tab on

the back edge of the video cassette.

It is possible to record on a video cassette with the

record protection tab removed by covering the hole

with self adhesive tape.

Remember you can record one programme while

watching another by starting your one-touch recording,

press

TV/VCR

to select TV mode and then selecting a

different channel on your TV.

Advertising