Aiwa HV-DH1EH - Manual (Page 30)

Additional Operation - VCR part
Hi-Fi Stereo Sound System
Your VCR will record and playback Hi-Fi stereo sound.
This allows you to record and playback the sound in
several different ways. Video cassettes recorded on your
VCR will have a normal mono audio track and two VHS
Hi-Fi stereo audio tracks. These stereo tracks allow you
to make audio recordings in Hi-Fi stereo or bilingual
mode from a TV broadcast, stereo audio system, video
disc or another Hi-Fi VCR.
2
1
Your VCR's allows you to enjoy broadcasts with
standard stereo, bilingual and mono sound. The
particular type of sound received or that recorded
will be briefly displayed on the TV screen for a
couple of seconds:
STEREO
Sound is automatically recorded on the Hi-Fi stereo
and mono tracks of the video tape.
BIL
Both audio channels will be recorded on the Hi-Fi
stereo tracks. The primary language channel (left)
will be recorded on the mono track of the video
tape.
MONO
The sound is recorded on the Hi-Fi tracks and the
mono track of the video tape without any separation.
Press AUDIO repeatedly until the desired audio mode
appears.
The choice is STEREO , LEFT , RIGHT and MONO .
In BIL playback the primary language is output
onthe left channel and the secondary channel is
output simultaneously from the right channel when
audio output is set to
STEREO . The primary language
willbe output from both channels when the audio
setting is
MONO .
Please note that when adjusting the tracking control
Hi-Fi stereo sound may revert to MONO .
Wide Screen Compatibility 16:9
Your VCR can record and play back wide screen aspect
ratio programmes (16:9). To record a wide screen format
programme successfully the correct type of wide screen
signal must be broadcast by the TV station.
2
3
1
Switch on your VCR.
Press ©/ SETUP .
Press F or G to select 16:9/4:3 .
Press OK/ENTER .
Press D or E repeatedly to select: AUTO, 4:3 or
16:9 .
AUTO :
Automatically plays back Wide-Screen
programmes as Wide-Screen and Normal
programmes as normal.
4:3
Only for playing back and recording Normal format
recordings (4:3).
16:9:
Only for playing back and recording Wide-Screen
format recordings (16:9).
3
Press ©/ SETUP to remove the menus from the TV
screen.
To enjoy Wide-Screen playback you must
connect your VCR to the TV using a SCART cable.
To set the decoder
We have already described, how to connect a decoder
for pay-TV station as CANAL+ or PREMIERE on page
9. For the recording of an encoded station you do not
have to control anything. You just select the station and
wait shortly until the decoding will start. 1
2
Press ©/ SETUP.
The main menu will appear on the TV screen.
Press F or G to select the DECODER .
Press OK/ENTER .
Press D or E to select.
ON : When the decoder is connected to the AV2
socket.
OFF : When another VCR is connected to the AV2
socket.
Press ©/ SETUP to return to a TV picture.