Aiwa HV-DH1EH - Manual (Page 24)

Operation with DVD and Video CD
Playing a DVD and Video CD
U Playback Setup ay^CDwi^j fty^CD^n^i
• Turn on the TV and select the video input source con­
nected to the DVD player.
• Audio system: Turn on the audio system
and select the input source connected to the
DVD player.
1
2
3
Press OPEN/CLOSE to open the disc tray.
Load your chosen disc in the tray, with the label
facing up.
When a double-sided DVD is inserted, make sure
the side you want to play is facing up.
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead.
Ell
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which contains a menu.
Use the ◄ ► A T buttons to select the title/chapter
you want to view, then press OK/ENTER to start play­
back.
Press TOP/MENU or DISC MENU to return to the menu
screen.
AVCri2l^
• Use the number buttons to select the track you want
to view.
Press RETURN to return to the menu screen.
• Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on the each menu screen.
You also may set PBC to Off under setup. See page
18.
^9 Notes
- If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
“Parental Control”, on page 19).
- DVDs may have a region code.
- Your player will not play discs that have a region code
different from your player. The region code for this
player is 2 (two).
- To watch a DVD while performing a timer
recording, press TV/VCR.
General Features
^SNote
Unless stated otherwise, all operations
described use the remote control. Some
features may also be available on the Setup menu.
Moving to another TITLE JDVa
? I
When a disc has more than one title, you can move to
another title as follows:
• Press DISPLAY when playback is stopped, then
press or the appropriate numbered button (0-9)
to select a title number.
Moving to another CHAPTER/TRACK
<DV№ i}lCDH% [©
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
• Press or briefly during
playback to select the next chapter/track or to return
to the beginning of the current chapter/track.
• Press twice briefly to step back to the previous
chapter/track.
• To go directly to any chapter during DVD playback,
press DISPLAY. Then, press A^T to select C
(chapter) (or for a Video CD, select T for track). Then,
enter the chapter/track number using the numbered
buttons (0-9).
^SNote
For two-digit numbers, press the buttons in rapid
succession.
Slow Motion
AVCri2l^ i}LCDH%
1 Press or ^M during pause.
The player will enter SLOW mode.
2 Use the ^M or ^M to select the required speed: t
1/16, t 1/8, t 1/4 or t 1/2 (backward), or T 1/16,
T 1/8, T 1/4 or T 1/2 (forward).
3 To exit slow motion mode, press PLAY.
^9 Note
Slow motion playback in reverse is not applicable for
Video CD.
1/12 1/3