Additional operation - vcr part, On screen display, Turning on/off the on screen display – Aiwa HV-DH1EH User Manual

Page 29: Tape counter memory stop, Child lock, Before operation - vcr part -15, On-screen display, Additional operation - vcr part on screen display

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Additional Operation - VCR part

On Screen Display

You may easily display the current time or tape counter,

amount of tape left, day, month, year, day of week,

programme channel, tape speed and operational mode

of your VCR will appear on the TV screen. If a recording

is taking place these On Screen Displays will not be

recorded onto the tape.

1

2

Press

CLK/CNT

to display.

Press

CLK/CNT

repeatedly to cycle through the

display options. The tape counter and amount of

tape left will appear if there is a tape loaded.

After 3 seconds the majority of the On Screen

Displays will clear leaving only the clock or tape

counter and the amount of tape left on the screen.

Press

CLK/CNT

again to remove all displays from

the TV screen.

Turning on/off the On Screen

Display

Set the OSD off when dubbing a tape to another

tape.

1

Press ©/

SETUP.

2

3

4

Press or ►to select

F.OSD ON/OFF,

then press

OK/ENTER

.

Press A or T to select

ON

or

OFF.

Press ©/

SETUP

to return to the normal screen.

O
■D

m

J3
>

Tape Counter Memory Stop

The

Digital Tape Counter

can be displayed on the display

window instead of the time by pressing

CLK/CNT

on

the remote control. The Digital Tape Counter indicates

the relative positions of recordings on the tape.

1

Press

CLK/CNT

.

Press

CLEAR

to set the counter to 0:00:00.

Press

PLAY

or start recording.

The tape counter will display the actual play time in

hours, minutes and seconds.

2

Press

STOP

when playback or recording is complete.

Press ^M.

The tape will rewind and automatically stop when

the counter returns to 0:00:00.

Child Lock

The control buttons on the front of the VCR can be

switched off so that your VCR can only be operated

using the remote control.

1

Press

C.LOCK

.

^ will appear in the display window.

None of the buttons on the front of your VCR will

work (except

STOP and EJECT

).

If any buttons on the front of your unit are pressed

will flicker in the display window for a few sec­

onds.

2

Press

C.LOCK

again to switch off the child lock.

^ will disappear in the display window.

Advertising