Basic operations, To play one disc only, press disc direct play 1-3, Loading discs – Aiwa NSX-A555 User Manual

Page 12: To check the remaining time, Selecting a track with the remote control, Replacing discs during play, 1 press disc change, Playing discs, To play all discs in the disc compartment, press i

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CD PLAYING

BASIC OPERATIONS

To play one disc only, press DISC DIRECT PLAY 1-3.

The selected disc is played once.

CD EDIT/CHECK

LOADING DISCS

Press CD, then press

± OPEN/CLOSE to open the

disc compartment. Load disc(s) with the label side

up.

To play one or two discs,

place the discs on tray 1 and 2.

To play three discs,

press

DISC CHANGE

to rotate the trays

after placing two discs. Place the third disc on tray 3.

Close the disc compartment by pressing

A OPEN/CLOSE.

DISC CHANGE

Tray number of the

disc to be played

Total playing time

i6 4SÍ 23

.... r..................... ..

Total number of tracks

To stop play,

press ■.

To pause play,

press II. To resume play, press again.

To search for a particular point during playback,

keep

or ►► pressed and release it at the desired point.

To skip to the beginning of a track during playback,

press

or ►► repeatedly or turn

MULTI JOG.

To remove discs,

press

A OPEN/CLOSE.

To Start play when the power is off (Direct Play Function)

Press

CD.

The power is turned on and play of the loaded disc(s)

begins.
When ±

OPEN/CLOSE

is pressed, the power is also turned on

and the disc compartment is opened.

To check the remaining time

During play, press

CD EDIT/CHECK.

The amount of time

remaining until all tracks finish playing is displayed. To restore

the playing time display, repeat the above.
When using the remote control, press

CD EDIT/CHECK

while

pressing

SHIFT,

Selecting a track with the remote control

1

Press

DISC DIRECT PLAY 1-3

to select a disc.

2

Press numbered buttons

0-9

and

+10

to select a track.

Example:

To select the 25th track, press

+10, +10

and

5.

To select the 10th track, press

+10

and

0.

The selected track starts to play and continues to the end of

that disc.

Replacing discs during play

While one disc is playing, the other discs can be replaced without

interrupting play.

1

Press

DISC CHANGE.

2

Remove the discs and replace with other discs.

3

Press ±

OPEN/CLOSE

to close the disc compartment.

’ When loading an 8-cm (3-inch) disc, put it onto the inner circle

of the tray.

' Do not place more than one compact disc on one disc tray.
' Do not tilt the unit with discs loaded. Doing so may cause

malfunctions.

' Do not use irregular shape CDs (example: heart-shaped,

octagonal ones). It may result in malfunctions.

PLAYING DISCS

Load discs.

To Play all discs in the disc compartment, press I

Play begins with the disc on tray 1.

Number of track being played Elapsed playing time

I

I

1

13 « 03

12

ENGLISH

Advertising