Video/aux jacks, Cd digital out (optical) jack, Surround speakers “cl jacks – Aiwa NSX-A555 User Manual
Page 20: 1 press video/aux, 2 play the connected equipment, Other connections
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OTHER CONNECTIONS
CONNECTING OPTIONAL EQUIPMENT ■ LISTENING TO EXTERNAL SOURCES
-CD DIGITAL OUT
(OPTICAL)
• VIDEO/AUX
■ SURROUND
SPEAKERS
POWER
Refer to the operating instructions of the connected equipment
for details.
• The connecting cords are not supplied. Obtain the necessary
connecting cords.
• Consult your local Aiwa dealer for optional equipment.
VIDEO/AUX JACKS
This unit can input analog sound signals through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
(turntables, LD players, MD players, VCRs, TV, etc.).
Connect the red plug to the
VIDEO/AUX R
jack, and the white
plug to the
VIDEO/AUX L
jack.
When connecting a turntable
Use an Aiwa turntable equipped with a built-in equalizer amplifier.
CD DIGITAL OUT (OPTICAL) JACK
This unit can output CD digital sound signals through this jack.
Use an optical cable to connect digital audio equipment (DAT
deck, MD reporder, etc.).
Remove the dust cap (D from the
CD DIGITAL OUT (OPTICAL)
jack. Then, connect an optical cable plug to the
CD DIGITAL
OUT (OPTICAL)
jack.
When the CD DIGITAL OUT (OPTICAL) jack is not being
used
Attach the supplied dust cap.
SURROUND SPEAKERS “Cl JACKS
Connect optional surround speakers with the 8 ohms to 16 ohms
impedance to the jacks.
To play equipment connected to the VIDEO/AUX jacks proceed
as follows.
1 Press VIDEO/AUX.
“VIDEO” appears on the display.
2 Play the connected equipment.
To change a source name in the display
When
VIDEO/AUX
is pressed, “VIDEO” is displayed initially. It
can be changed to “VIDEO”, “AUX” or “TV”.
With the power on, press
POWER
while pressing
VIDEO/AUX.
Repeat the procedure to select one of the names.
To adjust the sound level of the external source
When the sound level of the external source is much higher or
much lower than that of other function sources, adjust it as follows.
1
Press
VIDEO/AUX
and play the equipment.
2 Press ◄◄ or ►► so that the sound level becomes the same
as that of other function sources.
During recording, the sound level can not be adjusted.
20
ENGLISH