AudioBahn Audiobah XM Ready A1100N - Manual (Page 13)

with either aball point pen or thin
metal object.
The RESET button is to be activated
forthefollowing reasons:
- Initial installation ofthe unitwhen all
wiring is completed.
- Allthefunctionbuttonsdonot
operate.
- Errorsymbolonthedisplay.
Note: Ifpress RESET button(27),the
unit can't workyet, please use a cotton
swab soaked in isopropyl alcohol to
clean the socket on the backofthe
front panel.
RADIO OPERATION
SWITCHING TO RADIO MODE
Press MOD button(6)shortlyto
select radio mode, the radio mode
appears in the display together with
the memory band and frequency.
SELECTINGTHE FREQUENCY
BAND
Atradiomode,press BND/LOU
button (13) shortly to select the desired
band. The reception band will change
in the following order:
|-►FM 1 FM 3 -I«- AM —|
SELECTING STATION
Press TUNE/TRAC^ button (17) or
TUNE/TRAC^ l◄◄button(16)shortly
to activate automatic seekfunction.
Press for several seconds until
"MANUAL " appears on the display, the
manual tuning mode is selected. If both
buttons have not been pressed for
several seconds, they will return to seek
tuning mode and "AUTO " appears on
the display.
LOCAL/DISTANT
Press LOC button (2) to select
between local and distantstations.
Local setting for reception of strong
station, and a distant setting for
reception ofweaker stations. This
function is effectduring AUTO SEEK
operation.
AUTOMATICMEMORY
STORING- PROGRAMSCANNING
- AutomaticMemoryStoring
Press AS/PS button(18)forseveral
seconds, the radio searches from the
current frequency and checks the
signal strength until one cycle search
isfinished. Andthen6strongest
stations are stored into the
corresponding preset number button.
- Program Scanning
Press AS/PS button(18)shortlyto
scan preset station. When the field
strength level is more than the
threshold level of stop level, the radio
is holding at that preset number for
several seconds with releasing mute,
then searches again.
STATION STORING
Press any one ofthe preset buttons (14)
(1 to 6) to select a station which had
been stored in the memory.
Press this button for several seconds
(until 2ND beeps come out), current
station is stored into the number
button.
MONO/STEREO
Press MON button(l)toselectmono
or stereo mode. You can sometimes
improve reception of distant stations
by selection mono operation.
ESPFUNCTION
Ifthe unit has the electronic
shockprooffunction,itcan be
shockproofforseveral seconds.
11