AudioBahn Audiobah XM Ready A1100N - Manual (Page 9)

Using the Detachable Front Panel
To Detach the Front Panel
l.Pressthe OPEN button,thenthefront
panel will be folded down.
2.To remove the front panel, lift itupata
little angle from horizontal position,
then first pull out the right side and
then pull out the left side.
3. For safekeeping, store the front panel
in the supplied protective case
immediately after being removed.
Protective Case
To Install the Front Panel
l.To install the front panel, first insert the
left side into proper position then insert
the right side into place.
2. When the two sides fixed into place,
push the front panel into main unit.
3.Note that ifthe front panel fails to lock
in position properly, pressing control
button may notfunction and the
display may be missing some
segments. Press the OPEN button and
then reinstall the front panel again.
Precautions when handling
1. Do not drop the front panel.
2. Do not put pressure on the display or
control buttons when detaching or re­
installing the front panel.
3. Do not touch the contacts on the front
panel or on the main unit body. It may
result in poor electrical contact.
4. Ifany dirt orforeign substances
adhered on the contacts, they can be
removed with a clean and dry cloth.
5. Do not expose the front panel to high
temperatures or direct sunlight in
anywhere.
6. Keep awayany volatile agents (e.g.
benzene, thinner, or insecticides) from
touching the surface of the front panel.
7. Do not attempt to disassemble the
front panel.