Anchoring down the building – Arrow Storage Products 697.68222 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Anchoring Down The Building

it is important that the entire floor frame be anchored after the building is erected.

Below are recommended ways of anchoring.

Arrow Anchoring Kit:

(Model No. AK4 or 60298)

Recommended for use with any suggested base.

Contains: 4 Anchors with Cable, Clamps and
installation instruction.

Anchoring into Wood/Post:

Use 1/4" Wood Screws. There are 1/4" (0,63cm) dia.
holes provided in the frames for proper anchoring.

OVERTHE BEAMS

AND INTO THE GROUND

Arrow Anchoring Kit:

(Model No. AK100 or 68383)

Recommended for use with the concrete foundation.

Contains: Corner gussets, perimeterclips, hardware,

1/4" masonary drill bit and installation instruction.

Anchoring into Concrete:

1. For poured concrete slab or footing or patio blocks:
Use 1/4"

X

2" Lag Screws.

2. For Anchor Post of Concrete poured after building is
erected: Use 1/4" x 6" Lag Screws.

10

Advertising