Arrow Storage Products 697.68222 - Manual (Page 17)

Step 4
• Parts Needed For •
• 6403 Door Track Splice (1)
Door Track Assembly • 9366 Door Track (2)
A17
The door track assembly supports
the sliding doors and reinforces the
front wall. It is made up of three pieces.
1
Using the door track splice,
(painted), join the door track
(galvanized) pieces end-to-end as
shown.
2 Insert four screws from the under­
side only.
Hint: The holes in the top side of the
doortrackassemblyareforfastening
the gable to the top of the front wall in
a later step.
NOTE:
Door Track Splice (painted part)
66769
3 Position door slides onto the
legs, from the end of door track
assembly, as shown in the end view.
4 Set this piece aside for later use.
1181/8"
300,0cm
Long Leg
on Top
Short Leg
on Bottom
STEP STEP
3 4
1181/8"
300,0cm
ENDVIEW
1181/8"
300,0cm
17