Nilfisk-ALTO STEAMTEC 5 IH User Manual

Page 4

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

STEAMTEC5IH

(GB)

d

CAUTION:

Never immerse the cleaner or its

parts in or under water or other

liquids. Risk of electric shock.

The cleaner may only be con­

nected to a correctly installed

plug socket.

Switching on the cleaner may
cause voltage huctuations.
Voltage huctuations should not
occur if the impedance at the

transfer point is less than 0.150.

If in doubt ask your local electric­

ity supplier.

Observe the latest edition of the

lEC regulations.

Recycling the steam cleaner

Make the old clean­

er unusable imme­
diately.

1. Unplug the cleaner and cut

the power cord.

Do not discard of electrical ap­

pliances with household waste.

As specified in European Direc­
tive 2002/96/EC on old electrical

and electronic appliances, used
electrical goods must be col­

lected separately and recycled

ecologically.
Contact your local authorities or

your nearest dealer for further

information.

CAUTION:

In the case of heat and mois­

ture sensitive materials, make

a test on a concealed place

first. Begin with a low steam

setting and keep a minimum dis­

tance of 6 cm. The high steam
temperature/quantity may dam­

age the object to be cleaned

(e.g. varnished parquet, wood,

wood ceilings, plaster, window

frames, surface-treated wood,

decorative beams, etc.).

Below we have listed some ex­

amples of applications:

Maintenance and repair

CAUTION!

Always remove the plug from
the power supply before clean­

ing or carrying out maintenance

work on the cleaner.

Guarantee

Our general conditions of busi­

ness are applicable with regard

to the guarantee.

Subject to change as a result of

technical advances.

Carry out only the maintenance
operations described in the op­
erating instructions. Use only
original Nilhsk-Alto spare parts.

The power cord must not differ
from the version specihed by the

manufacturer and may only be

changed by an electrician.

Do not make technical modifica­

tions to the cleaner.

Please contact your local au­

thorized Nilhsk-Alto equipment

distributor for all other mainte­

nance or repair needs!

Accessories and spare parts

Use only the accessories sup­

plied with the cleaner or speci­

fied in the operating manual.

Use original Nilfisk-Alto-spare

parts only.The use of other parts
can adversely affect safety.

Tests and approvals

The cleaner has been approved

in accordance with lEC/EN

60336-2-54.

Purpose

This cleaner is for domestic use

only.

Only use the cleaner for the
cleaning jobs described in the
operating manual.

This cleaner is suitable for

cleaning heat and moisture re­
sistant surfaces.

Read the operating manuals for

the machines and equipment
that you clean as there may be

limitations stated by the manu­

facturer. Do not use the cleaner
for ovens, microwaves, deep
freezers, refrigerators and other

electrical equipment.

Advertising