Continuous play, 1 insert tapes into deck 1 and deck 2, 3 press rev mode to select z) – Aiwa Z-L70 User Manual
Page 14: 4 press ◄►to start playback, About cassette tapes
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONTINUOUS PLAY
.f ■“ ■■
After playback on one deck finishes, the tape in the other deck
will start to play without interruption.
1 Insert tapes into Deck 1 and Deck 2.
2 Press TAPE/DECK 1/2 to select the deck to be
played back first.
3 Press REV MODE to select Z).
4 Press ◄►to start playback.
Playback continues until ■ is pressed.
About cassette tapes
• To prevent accidental erasure, break off the plastic tabs
on the cassette tape after recording with a screwdriver or
other pointed tool.
To record on the tape again, cover the tab openings with
adhesive tape, etc. (On Type ll tapes, take care not to
cover the Type II tape detection slot.)
' 120-minute or longer tapes are extremely thin and easily
deformed or damaged. They are not recommended.
' Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may break or jam in the mechanism.
14
ENGLISH