Aiwa CX-NA22 - Manual (Page 12)

............. IIIIIMi»
' c*"> ;' -; ■ , "V
BASIC RECORDING
This section explains how to record from the tuner, CD player, or
external equipment.
Preparation
• Use Type I (normal) tapes only. ,
• Set the tape to the point where recording will start.
• Note that recording is done only one side of the tape.
1 Insert the tape to be recorded on into deck 2.
Insert the tape with the side to be recorded on first facing
out from the unit.
-REJECT
2 Press one of the function buttons and prepare
the source to be recorded.
To record from a CD, press the CD button and load the
dlsc(s).
To record from a radio broadcast, press the TUNER button
and tune in to a station.
To record from a connected source, press the VIDEO/AUX
button and play.
3 Press the # REC button to start recording.
■ When the selected function is CD, playback and recording
start simultaneously.
To stop recording, press the ■ button.
To pause recording, press the II button. (Applicable when the
source isTUNER or VIDEO/AUX) To resume recording, press It
again.
11
ENGLISH
To erase a recording
1 Insert the tape to be erased into deck 2 and press the TAPE/
DECK 1/2 button to display “TAPE 2”.
2 Set the tape to the point where the erasure is to be started.
3 Press the # REC button to start the erasure.