To position the antennas fm antenna, To stand the am antenna on a surface, Remote control – Aiwa CX-NA22 User Manual
Page 5: Inserting batteries, When to replace the batteries, To use the shift button on the remote control, To use the function button on the remote control
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To position the antennas
FM antenna:
Extend fully and fix its end to the waii.
AM antenna:
Position to find the best reception.
To stand the AM antenna on a surface
Fix the ciaw to the slot.
REMOTE CONTROL
• Be sure to connect the speaker cords correctly. Improper
connections can cause short circuits in the SPEAKERS
terminals.
• Do not leave objects generating magnetism near the speakers.
• Do not bring the FM antenna near metal objects or curtain
raiis.
• Do not bring the AM antenna near other optional equipment,
the stereo system itself, the AC cord or speaker cords, since
noise wili be picked up.
• Do not unwind the AM antenna wire.
To connect other optional equipment -+ page 17.
Inserting batteries
Detach the battery cover on the rear of the remote controi and
insert two R6 (size AA) batteries.
O)
z
0
1
<
0.
tu
DC
OL
When to replace the batteries
The maximum operational distance between the remote controi
and the sensor on the main unit should be approximately 5 meters
(16 feet). When this distance decreases, replace the batteries
with new ones.
To use the SHIFT button on the remote control
Buttons © have two different functions. One of these functions
is indicated on the button, and the other on the plate above the
button.
To use the function on the button, simply press the button.
To use the function on the plate above the button, press the
button while pressing the SHIFT button.
To use the FUNCTION button on the remote control
The FUNCTION button substitutes for the function buttons (TAPE/
DECK 1/2, TUNER, VIDEO/AUX,CD) on the main unit.
Each time the FUNCTION button is pressed, the next function is
selected cyclically. When tapes are inserted in both decks, both
decks are selected with the FUNCTION button.
SHIFT
FUNCTION
■ PRESET
' If the unit is not going to be used for an extended period of
time, remove the batteries to prevent possible electrolyse
leakage.
’ The remote control may not operate correctly when:
- The line of sight between the remote control and the remote
sensor inside the display window is exposed to intense light,
such as direct sunlight
- Other remote controls are used nearby (those of a television,
etc.)
ENGLISH
4