Before operation, Audio adjustments, To turn the unit on – Aiwa CX-NA22 User Manual

Page 6: Demo (demonstration) mode, Flash window, To turn the unit off, To select with the remote control, Using the headphones, Sound adjustment during recording, Before operation è

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

BEFORE OPERATION

AUDIO ADJUSTMENTS

CD

T-BASS

SHIFT

■ VOLUME

To turn the unit on

Press one of the function buttons (TAPE, TUNER, VIDEO/AUX,

CD).

Playback of the inserted disc or tape begins, or the previously

tuned station is received (Direct Play Function).
The POWER button is also available.
When the unit is turned on, the disc compartment may open and
close to reset the unit.

DEMO (Demonstration) mode

When the AC cord is connected, the display window
demonstrates the functions of the unit. When the power is turned
on, the DEMO display is overridden by the operation display.
When the power is turned off, the DEMO mode is restored.

To cancel DEMO mode

Press the II SET button while the power is off. The clock

flashes on the display. (To set the current time, see “SETTING
THE CLOCK” on page 15.) To re-activate DEMO mode, press
the ► button while the power is off.

Flash window

The window on the top of the unit lights up or flashes while the

unit is being powered on.

To turn off the light of the top window, press the CD button while

pressing the ■ button. To turn back on, repeat the above,

To turn the unit off

Press the POWER button.

VOLUME

Turn the VOLUME control on the main unit, or press the
VOLUME buttons on the remote control.
The volume level is displayed as a number from 0 to MAX (31).
The volurr^ level is automatically set to 16 when the power is
turned off with the volume level set to 17 or more.

SUPER T-BASS SYSTEM

The T-BASS system enhances the realism of low-frequency

sound.

Press the T-BASS button.
Each time it is pressed, the level changes. Select one of the

three levels, or the off position to suit your preference. ’

l^+1^+2^+3^oFF (cancel)J

To select with the remote control
press the T-BASS button while pressing the SHIFT button.

Low frequency sound may be distorted when the T-BASS system
is used for a disc or tape in which low frequency sound is

originally emphasized. In this case, cancel the T-BASS system.

Using the headphones
Connect headphones to the PHONES jack with a standard stereo
plug (

06.3 mm, 'U inch).

No sound is output from the speakers while the headphones are
plugged in.

Sound adjustment during recording
The output volume and tone of the speakers or headphones may
be freely varied without affecting the level of the recording.

ENGLISH

Advertising