Aiwa CX-NA22 - Manual (Page 8)

PRESETTING STATIONS
The unit can store a total of 32 preset stations. (Each, band has
a maximum of 20 available preset stations.) When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
1 Press the TUNER/BAND button to select a band,
and press the ◄◄ DOWN or ►► UP button to
select a station.
2 Press the II SET button to store the station.
A preset number beginning from 1 in consecutive order for
each band is assigned to the station.
Frequency
POCK POP J^7Z
AI COIT
Preset number
3 Repeat steps 1 and 2.
Jhe next station will not be stored if a total of 32 preset stations
for all the bands or a total of 20 preset stations for one band
have already been stored.
PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
1 Press the BAND button while pressing the SHIFT
button to select a band.
2 Press the numbered buttons to selects preset
number.
Example:
TO select preset number 20, press the +10, +10 and 0 buttons.
To select preset number 15, press the +10 and 5 buttons.
Selecting a preset number on the main unit
Press the TUNER/BAND button to select a band. Then, press
the ► PRESET button repeatedly.
Each time the button is pressed, the next ascending number is
selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
the ■ CLEAR button, and press the II SET button within 4
seconds.
,
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
7
ENGLISH