Check the ac voltage, Speakers, 2 connect the stereo turntable to the main unit – Aiwa Z-R555 User Manual
Page 4: 3 connect the supplied antennas
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PREPARATIONS
Check the AC voltage
The rated voltage of your unit shown on the rear panel is 120 V
AC. Check that the rated voltage matches your local voltage.
IMPORTANT
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord in the end.
Speakers
There are no difference between the speakers. Both speakers
can be connected as L (left) or R (right).
1
Connect the right and left speakers to the main
unit.
Connect the right speaker cord to SPEAKERS R terminals,
and the left to SPEAKERS L terminals.
The speaker cord with the white stripe should be connected
to the
O
terminal and the black cord to the
O
terminal.
2
Connect the stereo turntable to the main unit.
Connect the red plug to VIDEO/AUX/PHONO IN R jack, and
the white plug to VIDEO/AUX/PHONO IN L jack.
3
Connect the supplied antennas.
Connect the FM antenna to FM 75 Q terminals and the AM
antenna to AM LOOP terminals.
AM antenna
3
ENGLISH