Aiwa Z-R555 - Manual (Page 7)

SOUND
-SHIFT
■ T-BASS
■VOLUME
VOLUME CONTROL
Turn VOLUME on the main unit, or press VOLUME
on the remote control.
The volume level is displayed as a number from 0 to MAX (31).
The volume level is automatically set to 16 when the power is
turned off with the volume level set to 17 or more.
SUPER T-BASS SYSTEM
The T-BASS system enhances the realism of low-frequency
sound.
Press T-BASS.
Each time it is pressed, the level changes. Select one of the
three levels or the off position to suit your preference.
~ j ~ j ~ j ^
r-BASS T-BASS T-BASS T-SASS
(cancel)
^
V
ir-C
To select with the remote control
Press T-BASS while pressing SHIFT.
Low frequency sound may be distorted when the T-BASS system
is used for a disc or tape in which low frequency sound is already
emphasized. In this case, cancel the T-BASS system.
GEQ
SHIFT
M
z
o
a
g
z
CL
3
o
M
This unit provides the following three different equalization curves.
ROCK: Powerful sound emphasizing treble and bass
POP: More presence in the vocals and midrange
CLASSIC: Enriched sound with heavy bass and fine treble.
Press GEQ repeatedly to select the equalization
mode.
The GEQ mode is displayed cyclically as follows.
|— ROCK—>- POP—► CLASSIC— GEQ OFF —i
(cancel)
The selected equalization mode is displayed.
u ROCK -f
To cancel the selected mode
Press GEQ repeatedly until “GEQ OFF” is displayed.
To select with the remote control
Press GEQ repeatedly while pressing SHIFT.
* MULTI JOG is also available to change the equalization mode.
To dim the illumination of the display
1 Press CLOCK/DIMMER twice, then press ENTER within 4
seconds.
2 Within 4 seconds, turn MULTI JOG to select the dimmer mode.
C
DIMMER 0-^-* DIMMER 1 — DIMMER 2 -^DIMMERS
a
DIMMER 0: The usual display.
DIMMER 1: The illumination ofthe display is dimmer than usual.
DIMMER 2: The illumination of the display is dimmer than
DIMMER 1.
DIMMERS: The illumination of the display is dimmer than
DIMMER 2. The spectrum analyzer and the
illumination on the buttons also light off.
* and ►► are also available instead of MULTI JOG.
Using the headphones
Connect headphones to PHONES jack with a standard stereo
plug ( 06.3 mm, V a inch).
No sound is output from the speakers while the headphones are
plugged in.
Sound adjustment during recording
The output volume and tone of the speakers or headphones may
be freely varied without affecting the recording.
ENGLISH
6