To search for a station quickly (auto search), Uffi 93 :: 00, When an fm stereo broadcast contains noise – Aiwa Z-R555 User Manual

Page 8: L/r1 93 :: 00v, To change the am tuning interval, T'une ».v, Radio reception

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

RADIO RECEPTION

1.]^ C)

cm

5 o o

C 5 o o

c >oo

obofe"
(№ Ci CD

db o o

CD *0 O

o

■MONO

TUNER

■BAND

■SHIFT

PressTUNER/BAND to select the FM or AM band.

When TUNER/BAND is pressed while the power is off, the

power is turned on directly (Direct Play Function).

To select a band with the remote control

Press BAND while pressing SHIFT.

Press TUNER PRESET repeatedly to select the

manual tuning mode.

Each time the button is pressed, the following three tuning
modes are selected cyclically.

® Preset tuning mode: The preset number flashes.
(D Auto search mode: “SEARCH” is displayed.
(D Manual tuning mode: “SEARCH” is not displayed and

the preset number does not flash.

Frequency SEARCH Preset number

To search for a station quickly (Auto Search)

Press TUNER PRESET repeatedly to display “SEARCH”(auto

search

mode),

and

turn

MULTI

JOG

clockwise

or

counterclockwise until the frequency starts to change rapidly.
After tuning in to a station, the search stops.

SEARCH

UFfi 93 :: 00-

To stop the Auto Search manually, turn MULTI JOG a little in
either direction.

• The Auto Search may not stop at the stations with very weak

signals.

• ¡◄◄DOWN and ►MUP are also available to search for a

station. Keep •◄◄DOWN or ►WUP pressed until the tuner
starts searching. Press the button to stop the search manually.

When an FM stereo broadcast contains noise

Press MONO TUNER on the remote control while pressing SHIFT

so that “MONO” appears on the display.

Noise is reduced, although reception is monaural.

MONO

L/R1 93 :: 00V

C-Cr;V

To restore stereo reception, press MONO TUNER on the remote
control while pressing SHIFT so that “MONO” disappears.

To change the AM tuning interval
The default setting of the AM tuning interval is 10 kHz/step. If
you use this unit in an area where the frequency allocation system

is 9 kHz/step, change the tuning interval.
Press POWER while pressing TUNER/BAND on the unit.

To reset the interval, repeat this procedure.

The preset tuning mode is skipped if no station is preset.

3

Turn MULTI JOG clockwise or counter-clockwise

to tune in to a station.

The frequency changes as you turn MULTI JOG. When a

station is received, “TUNE” is displayed for 2 seconds.

During FM stereo reception, {li®D) is displayed.

(l(®il)

t-C.V-i'

./ T'UNE ».V

l«DOWN and ►WUP are also available to tune in to a

station.

NOTE

When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.

7

ENGLISH

Advertising