Switching on and off – AEG 730 E-m User Manual

Page 19

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Switch my oven off before you start cleaning it, i.e. all switdies
for the oven have to be at tfie “0” or "Off” position.

The grease filter has to be cleaned as and when necessary. To do

this, take hold of it by the handle and puli it out upwards from the

back wall of the oven.

Boil it briefly in the same cleaning product as you use in the dish­

washing machine, or with soft soap. Fit it back in-but not until it is
dry - from on top into the openings in the rear wall of the oven.

First decide with which heating modeyouwanttouse my oven. Then

set my switches - heating modes - to the corresponding symbol
e.g. É for hot air. Then turn my oven temperature switch to the

necessarytemperature. Turn this switch to the right to a higher tem­
perature. The red pilot lamp shows as long as the oven is being heat­

ed and goes out as soon asthesettemperature is atta! ned. It comes

back on when the oven is being reheated.
If you preheat my oven (see corresponding note in the Tables), do
not insert the food to be baked/roasted until the red pilot lamp first

goes out. To utilize the afterheat, you should switch off my oven
around 5-10 minutes before the end of the baking/roasting time.
To do this, turn my oven temperature switch to the left to the Off

position and the heating mode switch to 0.

Cleaning the

grease filter

— Switching on
and off

103

Advertising