Aiphone YAZ-90-3W - Manual (Page 7)

7
OPERATIONS
SELF-CHECK
1. Pick up handset and dial tone is heard.
2. Press number buttons [o], [T], [T|and [a]. Your station is placed in self-check mode. Busy tone means
your operation is void. Try again.
3. Depress and hold down either number button Q], [ 2 ]or|l]to check the corresponding talk channel.
4. A continuous tone means your station is operative. An intermittent tone means your station is
non-operative.
STATION CALLING
1. Pick up handset.
2. Press two dial buttons of station to talk with
(example: [T], [o]for Station #10).
3. Cali by voice, holding down PAGE button in handset.
4. Communicate. At the end, replace handset.
Tremolo tone
Talk as on a telephone after the called station replies.
Busy tone
The station is in communication.
Hang up and call later.
OR
Press
[®l
button. Camp-on busy is set, and hang up.
(The LED flashes to indicate)
RECEIVING
CALLTRANSFER
incoming call is annunciated by either tremolo or voice.
Lift handset and reply.
Note; Tremolo call tone times out in approx, 35 sec.
When you transfer your call with one station to another;
Press button and a Station No. you will transfer the
call to. Hold on until the Station replies.
After talking, hang up.
OR
Press
[®l
and the Station No.
INTERMITTENT tone means your transfer is being
completed. You may hang up.
COMMUNICATION AMONG 3 STATIONS
(or Call transfer)
CALL TRANSFERRED STATION
[ no ] •
To have a third Station to join your present talking, press
[x] button and Station No. to ring. When you hang up,
call transfer is completed.
If your call will not be answered within approx. 18
seconds, it returns to initial two-party conversation.
SECRETARY TRANSFER (Station transfer)
SECTETARY NO.
@ • [^
To have any of incoming calls to be transferred to your
Secretary Station or any designated Station;
Lift handset. Press [®] button and two digits of Secretary
station. Replace handset. Indicator LED flashes on your
Station. Hang up.
To clear;
Press and buttons.
- 7