Removing the loader from your tractor – Allied Telesis S795 TSL User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Removing the Loader from Your Tractor
WARNING ! When removing the loader, it must be
fitted with a bucket or other suitable attachment
to give the frame stability after removal, if this is
not done, the frame will not remain standing.
/h
IMPORTANT ! Always remove the loader on firm,
level ground (away from children's play areas and
high traffic areas). This makes attaching and
removing much faster and easier. It also makes
the free standing loader more stable.
1. Raise the loader, lower support stand tubes and
lock into position.
Lower the loader until the stand tubes are firmly on the
ground and then dump the bucket so that it is also firmly
on the ground. There should be a slightly downward
pressure.
3. Loosen the bolts from the rear of the subframe boots and
swing bolt up into lock position.
16