Removing the loader from your tractor, Odli – Allied Telesis S795 TSL User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Removing the Loader from Your Tractor
(Continued)
4. Roll back the bucket slightly and simultaneously extend
or retract the lift cylinders to free hooks from spools.
Then slowly back up the tractor.
5. Once the subframe is clear of the boot and the hook is clear of the mounting boss,
roll back the bucket all the way. This raises the rear uprights of the loader.
NOTE: On some mountings, the
lift cylinders must be extended
more while the tractor is
backing up, so that the
subframes clear the front axle.
6. Continue backing up until the loader is clear.
CAUTION! Be sure the hoses DO NOT get
pinched or catch on any frame members
while backing up.
ODLi^