Presening stations, 2 press the set button to store the station, Preset number tuning – Aiwa AV-D50 User Manual

Page 14: 1 press the tuner button to select a band, To clear a preset station, When using the remote controi, 3 repeat steps 1 and 2, Presetting stations

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

PRESEniNG STATIONS

aaa

aaa

aoc3

Q Q

O O

C O O =

CDdD

®CD(

0C3

■DOWN

■UPW

The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset

number to tune in to a preset station directly.

1 Press the TUNER button to select the band, and

press the UPA or DOWNT button to select a
station. Direct tuning is also available.

2 Press the SET button to store the station.

A preset number assigned to the station, beginning from 1 in
consecutive order for each band, flashes in the display for
two seconds.

PRESET NUMBER TUNING

1 Press the TUNER button to select a band.

2 Press the numbered buttons to select a preset

number.

Example:

To select preset number 25, press 2 and 5.
To select preset number 7, press 0 and 7.

To clear a preset station
Select the preset number of the station to be cleared. Then, press
the SET button, and press the SET button again within four
seconds.
The preset numbers of all other stations in the band with higher

numbers are decreased by one.

When using the remote controi

Press UPWH or DOWNK< button to select a preset number.

The DIGIT buttons on the remote control can not be used when
selecting a preset number.

1C BGM

' I

3 Repeat steps 1 and 2.

No more stations will be stored if a total of 32 stations have

already been stored for all the bands.

When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.

13

ENGLISH

Advertising